• Metrode Welding Rod 131BMP
Metrode 131BMP description: These consumables are designed for welding wrought or cast martensitic 12%Cr (type 410) stainless steel. Fabrication welds of matching composition such as this must be tempered by appropriate PWHT, owing to high hardness (~450HV) and low ductility in the as-welded condition. Conventional 410 has variable toughness but following PWHT the 13.1.BMP electrode with 1.5%Ni has good impact properties down to –10°C or lower depending on the heat treatment schedule. Plain 12%Cr steels are the most simple and economic alloys with stainless properties. Variants with Ti (409), Al (405) or low carbon (410S) are more or less fully ferritic with typically lower strength than type 410.

Write a review

Note: HTML is not translated!
    Bad           Good

Metrode Welding Rod 131BMP